Ultra-Thin Free-Standing Polymer Film

PolyK

Trek

Piezotech

Emitech Quorum

Matsusada

Sun Electronics

Dyneon

PolyK Technologies

DuPont

Krohn-Hite

View all Brands

PolyK

Trek

Piezotech

Emitech Quorum

Matsusada

Sun Electronics

Dyneon

PolyK Technologies

DuPont

Krohn-Hite

Kureha

Kynar

View all Brands

We have a collection of ultrathin polymer film with high dielectric breakdown strength, low dielectric loss, and with thickness below 10 um.

They are free standing and produced in commercial manufacturing process with thickness uniformity better than +/-3%. While we sell it in paper size (200 mm x 270 mm) or small roll for research and development purpose, we can provide the supplier information if you need > 1000 kg film.

Free standing film thickness from 0.9 um to 10 um.

For electrostatic pinning, brake, chuck, haptics, robotics, MEMS, dielectric energy strorage, etc.

Quick view

Ultrathin High Temperature Single-Sided Kapton polyimide tape: ~5 um thick film + 2.5 um thick Acrylic adhesive

MSRP:

Was:

Now: $300.00

Add to Cart
Quick view

Polyester Mylar film, 0.9 um thick to 6.0 um with one surface Aluminum Electrode

MSRP:

Was:

Now: $300.00

Choose Options
Quick view

Table-top Film Doctor Blade and Wire Rod Coating Machine with Heated Vacuum Stage

MSRP:

Was:

Now: $7,300.00

Add to Cart
Quick view

15 Type Polymer Capacitor Film R&D Kit

MSRP:

Was:

Now: $2,000.00

Add to Cart
Quick view

PET Mylar Ultrathin Film Kit, 12 Thickness 0.9 um to 25 um

MSRP:

Was:

Now: $1,200.00

Add to Cart
Quick view

Polyester Mylar film, 0.9 um to 250um, 200 mm x 280 mm

MSRP:

Was:

Now: $200.00

Choose Options
Quick view

Kapton polyimide 25 um thick film with aluminum electrode

MSRP:

Was:

Now: $200.00

Choose Options
Quick view

High Dielectric Constant Ultrathin Single-Sided PVDF tape: 12 um thick film + 4 um thick adhesive

MSRP:

Was:

Now: $200.00

Add to Cart
Quick view

PVDF High-K Film (12), 12 um thick with two surface Aluminum Electrode

MSRP:

Was:

Now: $300.00

Choose Options
Quick view

Ultrathin High Temperature Single-Sided Kapton polyimide tape: 12 um thick film + 5 um thick silicone adhesive

MSRP:

Was:

Now: $200.00

Add to Cart
Quick view

Ultrathin Kapton HN polyimide ~5 um or ~3 um thick film

MSRP:

Was:

Now: $250.00

Choose Options
Quick view

Ultrathin Kapton HN polyimide 3 um or 5 um thick film with gold electrode

MSRP:

Was:

Now: $750.00

Choose Options

Quick view

Ultrathin High Temperature Single-Sided Kapton polyimide tape: ~5 um thick film + 2.5 um thick Acrylic adhesive

Ultrathin free-standing single sided high temperature tape: ~5 um thick Kapton polyimide film with ~2.5 um thick single sided acrylic adhesive + 24 um thick release liner (tape protection layer), 250 mm x 200 mm size, each pack has two sheets Total...

MSRP:

Was:

Now: $300.00

Add to Cart
Quick view

Polyester Mylar film, 0.9 um thick to 6.0 um with one surface Aluminum Electrode

One piece Mylar PET polyester film with thickness from 0.9 um to 6.0 um. For R&D and acoustic loudspeaker membrane and electrostatic chuck/brake One surface with aluminium electrode (about 1-2 ohm/sq). For 1.4 um thickness, one order is for two...

MSRP:

Was:

Now: $300.00

Choose Options
Quick view

Table-top Film Doctor Blade and Wire Rod Coating Machine with Heated Vacuum Stage

Tabletop film coating machine to prepare dielectric and piezoelectric film for research and development: 1. Maximal coating size: 300 mm x 440 mm [width can vary from 0 mm to 300 mm with the attached magnetic width blocks] 2. Heating stage: maximal 150...

MSRP:

Was:

Now: $7,300.00

Add to Cart
Quick view

15 Type Polymer Capacitor Film R&D Kit

15 different polymer films with thin thickness for capacitor R&D PVDF-TrFE 70/30 (mol), ~15 mm thick, 140 mm x 250 mm (DMF cast, vacuum dried and annealed) PVDF-TrFE 70/30 (mol), 4~5 mm thick, 140 mm x 250 mm (on Mylar, peel off with scotch tape...

MSRP:

Was:

Now: $2,000.00

Add to Cart
Quick view

PET Mylar Ultrathin Film Kit, 12 Thickness 0.9 um to 25 um

12 differen thickness: 0.9 um, 1.4 um, 2.0, 3.0, 3.5, 4.0, 4.5, 6.0, 8.0, 10.0, 12.5, and 25.0 um, each is about the size of letter paper

MSRP:

Was:

Now: $1,200.00

Add to Cart
Quick view

Polyester Mylar film, 0.9 um to 250um, 200 mm x 280 mm

One piece of 200 mm x 280 mm size Mylar PET polyester film with thickness of 0.9 to 15 um. For R&D and acoustic loudspeaker membrane. Some film thickness may be narrower than 200 mm. In such case, we will provide several pieces so the total area is...

MSRP:

Was:

Now: $200.00

Choose Options
Quick view

Kapton polyimide 25 um thick film with aluminum electrode

Polyimide Kapton HN film, ~25.0 um thick, 300 mm x 210 mm size With aluminum coating (about 100 nm by therml evaporation). 1 ohm/sq One surface with aluminum or Both surfaces with aluminum Aluminum can be easily etched with dilute NaOH, KOH,...

MSRP:

Was:

Now: $200.00

Choose Options
Quick view

High Dielectric Constant Ultrathin Single-Sided PVDF tape: 12 um thick film + 4 um thick adhesive

Ultrathin free-standing single sided high dielectric constant PVDF tape: ~12 um thick PVDF film (orientated) with ~4 um thick single sided acrylic adhesive + 50 um thick release liner (tape protection layer), 290 mm x 210 mm size, each order is for one...

MSRP:

Was:

Now: $200.00

Add to Cart
Quick view

PVDF High-K Film (12), 12 um thick with two surface Aluminum Electrode

PVDF film with thickness 12.0 um. For R&D and acoustic loudspeaker membrane and electrostatic chuck/brake, electrostatic energy storeage Both surfaces with aluminium electrode (about 5-10 ohm/sq,E-Beam evaporated). One order is for one sheet with 210...

MSRP:

Was:

Now: $300.00

Choose Options
Quick view

Ultrathin High Temperature Single-Sided Kapton polyimide tape: 12 um thick film + 5 um thick silicone adhesive

Ultrathin free-standing single sided high temperature tape: ~12 um thick Kapton polyimide film with ~5 um thick single sided silicone adhesive + 75 um thick release liner (tape protection layer), 290 mm x 210 mm size, each pack has two sheets Total...

MSRP:

Was:

Now: $200.00

Add to Cart
Quick view

Ultrathin Kapton HN polyimide ~5 um or ~3 um thick film

Ultrathin free-standing DuPont Kapton HN film, ~5.0 um thick, 220 mm x 200 mm size for research and development. also with thinner 3 um thick film, 200 mm x 250 mm size. Each order includes two sheets with the same thickness. Please let us know if you...

MSRP:

Was:

Now: $250.00

Choose Options
Quick view

Ultrathin Kapton HN polyimide 3 um or 5 um thick film with gold electrode

Ultrathin free-standing polyimide film, 250 mm x 200 mm size Two thickness available: 3 um or 5 um one surface with 50 nm thick gold electrode. for research and development. Gold Surcharge: due to recent significant increase in gold price, the...

MSRP:

Was:

Now: $750.00

Choose Options

1
2
3
4
Next

1
2
3
4
Next

Compare Selected