Product Description
Advanced amplifiers for piezo and pyro sensors, with both charge mode and voltage mode.
Charge or Voltage Mode Operation
BNC Input and Output
0.01 to 1000 mV/pC Sensitivity Range in Charge Mode
1M to 1G Input Resistance, -40 to 40dB Gain in Voltage Mode
Multi-Pole, Low-Pass and High-Pass Filtering with -3dB Frequencies Ranging from 0.1Hz to 100kHz
Internal Battery (2 x 9V) or external 24VDC Power Supply Operation
With two 25 mm x 5 mm piezo PVDF sensor and cables. with 24 Vdc power adapters, with two 9V batteries
Voltage Mode:
Input Resistor Values 1M, 10M, 100M, 1G Ω
Gain 0 to +40 dB in 10 dB Increments with -40 dB Switch
Noise 30 mVrms (0.20 Vpp) typ, 1 Hz to 100 kHz, 1 GΩ Input, +40dB (lower on battery power)
Charge Mode:
Feedback Capacitor Values 100pF, 1nF, 10nF, 100nF
Sensitivity Range 0.01 to 1000 mV/pC
Noise 20 mVrms (0.13 Vpp) typ, 1 Hz to 100 kHz, 100pF, +40 dB Gain (lower on battery power)